/ Stihl FS 411 C-EM Ryddesag inkl. sele og tre skjæreutstyr
Stihl FS 411 C-EM Ryddesag inkl. sele og tre skjæreutstyr
Stihl

Stihl FS 411 C-EM Ryddesag inkl. sele og tre skjæreutstyr

14 550 kr
Nettlager - Sendes om 3-5 ukedater
Produktbeskrivelse
Artikkelnummer: 41472000622
The strong and robust gasoline-powered clearing saw Stihl FS 411 C-EM has an extra large working diameter of 520 mm for very efficient work. 2-MIX engine with high traction and low fuel consumption, delivers enough power for demanding, large areas with grass, overgrown areas and when caring for young stock.

Delivered with saw blade, pruning blade, trimmer head and clearing harness Advance X-treem.


M-Tronic

Fully electronic ignition point regulation and fuel metering. The engine control system M-Tronic (M) provides optimal engine power in all modes, constant top speed and very good acceleration. In addition, the system has a memory function, which further improves driving characteristics. Manual carburetor adjustment is a thing of the past.


Easy2Start (E)

A spiral spring between the pulley and the crankshaft stores the energy and compensates the power peaks from the starting pull. Result: you only need half as much force to start the machine and the speed of the starting pressure itself can be reduced by as much as two thirds.STIHL 2-MIX motorZoom


2-MIX engine

Stihl's two-stroke engine with 2-MIX technology provides high power, good traction and saves up to 20% fuel compared to equivalent STIHL two-stroke engines without 2-MIX technology. The emissions of harmful substances are also greatly reduced by up to 70% and the engine meets the requirements according to EU II without any problems.


One-grip controls

All engine operating modes that are conveniently and easily controlled with one and the same hand. The work becomes both easier and safer.


Rule

A handlebar facilitates work and improves ergonomics and is the natural first choice when working over larger surfaces. With a handlebar, you can work calmly and methodically in large oscillating movements, from side to side. The handlebars can also be adjusted according to your needs.


4-point anti-vibration system

On the new generation of STIHL clearing saws, there are built-in steel springs as anti-vibration elements. These steel springs absorb and reduce the oscillations that occur in the motor and the rotating cutting tool. The handles become almost vibration-free, which provides a very good working environment and the machine is very easy to drive and control.


Harness Advance X-treem

Provides great mobility thanks to freely hanging leg plate. Extra ergonomic and comfortable when clearing the forest and saw blade. Very easy. Can be completed with tool backpack. Now with a comfort hook so that you can quickly and easily take off and put on the clearing saw.


Tool-free adjustment of the handlebars

The handlebar is individually adjustable via a single knob, completely without tools. It can also be folded down completely against the rigging pipe in the so-called transport mode.


Compensator

Stihl compensator, a control system in the carburettor, which ensures that the fuel-air mixture is always optimal in relation to how dirty the filter is. The compensator provides optimal effect with low emissions. Only when 80% of the filter surface is occupied is it time to clean the filter. The filter cleaning intervals are significantly extended and enable long work shifts without
interruption.


Spring-loaded start/stop button

With the spring-loaded start/stop button, the machine always automatically returns to the start position and is always ready to start. Incredibly simple and convenient.


Primer

With the manual fuel pump, gasoline is pumped into the carburetor with a few simple thumb presses. You no longer have to pull the starter rope to get petrol to the carburettor. There is no risk of overfilling as all excess petrol flows back into the tank.


Winter mode

Very simple system where the machine can be quickly switched from summer to winter mode. During the cold season, icing of the carburettor and air filter is thus prevented.


Large fuel tank

The transparent fuel tank holds a full 0.75 l (FS 240 - 460) or 0.99 l (FS 490/560), which provides long work sessions without any disturbing tank stops. The fuel level is easy to check because the tank is transparent, which also eliminates unnecessary stops. It is also easy to fill in new petrol in the well-proportioned opening.


Air filter with long operating time

Easily accessible pleated paper filter with large combined filter surface provides very long cleaning intervals. Easily accessible location so that work interruptions are kept to a minimum.
Produktspesifikasjoner
Senterhull
20 mm
Sylindervolum
41.6 cm³
Drivkraft
Bensin 2-takts
Diameter på trimmerline
2,7-3,3 mm
Effekt
2 kW
Type gasshåndtak
Pekefinger
Lydnivå
115 dB(A)
Lydtrykknivå
100 dB(A)
Inkludert skjæreutstyr
Sagblad, Krattblad, Trimmerhode
Standard sele
Advance X-Tree
Vekt
13.008 kg
Vibrasjoner venstre
2.3 m/s²
Vibrasjon Høyre
2.1 m/s²